Search Products

Copper Barrier Links

Manufactured from high conductivity copper, these links are designed to be used where a solid moisture block barrier is required in the joint between two copper cables.

Can be crimped with standard NZ/Australian crimp tooling.
For special links e.g. bellmouth or imperial…

Wire Rope Cutter

With it's hardened jaws this gives you the ability to cut through steel rod, wire rope and a number of aluminium and copper cable sizes. It does have aluminium handles ensuring that it can be easily transported around.

Key Featues:

Heavy duty…

Earth Rod Couplers

Brass earth rod couplers are available for joining copper bonded 12.7mm earth rods. 

Used to join multiple earth rods together.

Ball Fittings

Vibration Dampers

The MPS 4D range of Vibration Dampers are designed to provide the best possible
protection from Aeolian vibration for conductors and earth wires (ground or shield wires).
These are designed to dissipate the maximum amount of vibration energy to prevent fatigue damage…

Bimetal Lugs - Narrow Palm - Flexible Aluminium

ECL has the full range of narrow palm bimetal lugs suitable for fine stranded flexible aluminium cable. These are used for MCCB connections. With over 30 years in NZ, our BL lugs are synonymous with durability and reliability.

Our bimetal lugs…

Metric

ACSR Cutter

This cutter has specifically designed jaws to cut through ACSR cable, but not limited to just this. It is also capable of cutting spring wire, aluminium and copper cable, and steel bar.

Key Featues:

Heavy duty hardened jaws
Aluminium handles to assist with…

Imperial

Copper Switchgear Connectors

Copper switchgear connectors are designed for termination of copper cables to a 12mm switchgear stem. 

Once crimped to the cable the connector is fastened to the switchgear stem by a means of a grub screw in the collar.

Manufactured from high purity…

Copper C Connectors

Copper C connectors are manufactured from C form copper section, and are commonly used for interconnection of distribution earthing grids.

Manufactured from high conductivity copper and supplied as tin plated, they are crimped using the designated compression dies shown. Please use…

Copper Crimp Links

Manufactured from 99.95% pure copper tube for the best electrical performance, our links are designed for jointing of identical sized copper conductors. 

Crimped using standard indent or hex die tooling.
For special links e.g. imperial cables please contact us today.
Bellmouth links for…

Copper Crimp Lugs

ECL copper lugs are manufactured from 99.9% oxygen-free high conductivity copper and are electro tinned.

ECL brand of lugs have been used for over 30 years in all sectors of the electrical industry and are known for their reliability.  A palm…

Bellmouth Copper Lugs

Bellmouth lugs are specifically designed for ease of termination of fine stranded flexible cables.

Because flexible cables tend to 'splay' when the cable insulation has been removed, the enlarged cable entry provided by the bell mouth will accommodate the strand spread.

Bellmouth…

Circuit Breaker Lugs - Narrow Palm

ECL circuit breaker lugs have narrow connection palms and are specifically designed for use on moulded case circuit breakers with reduced size connecting tunnels.

Circuit breaker lugs can be crimped with standard hexagonal dies and have the added feature of a…

Long Barrel Sealed Lugs

Long barrel sealed copper lugs are designed for outdoor applications.

Manufactured from high conductivity copper, the palms are internally solder sealed and there is no inspection window. These lugs are designed to be crimped with standard crimp tooling. The longer barrel…

Long Barrel Long Palm Lugs

Long barrel long palm copper lugs are designed for outdoor situations, have no viewing window and have a solder sealed palm junction.

Lugs are supplied blank as standard and can be easily accommodate two bolts in the palm. Long barrel, long…

Right Angle Lugs

ECL right angle copper lugs are designed for applications where connection space is minimal.

Manufactured from high conductivity copper tube, the right angle lugs are electrotinned and crimped using standard tooling.

Larger sizes available on request.
45° angle lugs are also available, please…

Solid Forged Copper Lugs

ECLF copper lugs are forged from solid copper rod. These are the preferred choice for low and medium voltage high current situations because of their mechanical strength and waterblock construction.

ECLF lugs can be crimped with conventional copper hex dies and…

Copper Stalk Lugs

ECL manufacture the full range of copper stalk lugs for use with specialist switchgear.

Copper Stalk lugs are manufactured to order from 99.9% pure high conductivity copper and are crimped using standard hexagonal dies.

For special requests, please contact us today.

Please specify…

Copper Reducing Links

Machined from high conductivity copper billet, ECSR copper reducing links have an internal centre barrier and can be made to any configuration.

Copper reducing links for imperial cables can be manufactured also.

Copper reducing links can be crimped with standard NZ tooling…

Bimetal Switchgear Connectors

Bimetal switchgear connectors are designed for termination of aluminium cable to a 12mm switchgear stem.

Manufactured from high purity Cu/AL and machined with a slot to insert the 12mm stem, the fittings come complete with a stainless steel locking collar.

Once crimped…

Crimp Tool Hire

If you need to hire a crimper to complete a job, please contact us. We offer up to a 30T crimp tool complete with the dies you require.

To book your slot please contact us!

Copper C Connector Dies

These dies are made from high-quality hardened steel to give it exceptional wear resistance.

Please contact the team for availability

Die Kit - 12 Ton

A kit of 10 dies of choice or a complete set of dies from 16mm² up to 400mm².

These can be supplied with a plastic carry case

Spacer Dampers

MPS range of Spacer Dampers has been designed specifically to provide best possible control for both Aeolian Vibration, and Sub-conductor Oscillation for bundled conductors used in HV transmission lines.

Additionally, these dampers were designed to meet the mechanical and electrical requirements…

Jumper Spacers

Barb Lock Cable Ties

Heavy duty nylon cable ties that have a stainless steel barb providing durable and secure fastening for various applications.

Material: Nylon 66UV Black
Flame Resistance: UL94V-2

Bare Stainless

Key Features:

Material: Stainless Steel 316
Working temp: -80C to 538C
Flammability: Fireproof
Other Properties: UV-resistant
Please contact us if the size you are after isn't displayed in the chart below!

Triple Clamps

Electrical Connections DCFT Cable Clamps are designed for the harshest environments. Manufactured from 316 grade stainless steel they are available in multiple sizes ranges and can take both trefoil and single cable configurations. The clamp can be supplied with a…

Copper Braided Sleeving

Tiger Tails

Tiger tails (line covers) provide temporary electrical insulation, visual warning and protection from power lines and conductors. Manufactured from high grade HDPE split industry standard pipe with high visibility striped patterning. Certified AS4202, Class I and voltage rated 650V.

Distribution Strain Insulators

Deadend insulators are designed to support conducting cables in tension or suspension with one side fixed to a pole, cross arm, or guy wire.

Maclean DS-M Series distribution deadend insulators utilise a conventional silicone shed housing through injection molding and bonding to…

Bimetal Links - Flexible Aluminium

ECL offer the full range of fusion welded flexible aluminium bimetal links from 25mm2 to 630mm2.

Our flexible bimetal links provide a quality termination point for the transition between aluminium and copper cables. Manufactured from high conductivity aluminium and copper the…

Gain Bases

Gain bases are used to secure wooden cross arms to the curvature of the wooden pole.

3GB-100
Cast aluminium

Cutout Fuses - DDOs

MPS cutouts are designed for use on power and utility overhead distribution systems to provide over-current protection and a visible indication of fuse operation. Over-current protection safeguards an electric system from excessive currents product by abnormal conditions such as line…

Earth Rod Clamp

Trunnion Clamps

Trunnion clamps are intended for use on tangent or shallow angle suspension spans with clamp top horizontal or vertical post insulators.

Aluminum clamps may be used with all aluminum, ACSR, or aluminum alloy conductors. Ductile iron trunnion clamps are used in copper…

Brackets & Mounts

We stock a wide range of mounting configurations for various insulator types.

Please contact us today to discuss your requirements.

Porcelain Pin & Bobbin Insulators

Glass Disc Insulators

For many customers and applications, toughened glass insulators provide high level performance and long-term security for high voltage insulation.

Glass disc insulators have higher resistance to breaking when compared to ceramics insulators and the mechanical compressive strength is 1.5 times higher…

Guy Strain Insulators

Shearhead PG Clamps

These Ensto connectors are designed for AL to Cu connections, where no mechanical tension is involved.  The patented lower section of the body protects the bolts from corrosion and makes tightening of the bolts easy.

The body is made of corrosion…

IPC Piercing Connectors

2 Ton Wire Grips

Wildlife/Bird Guards

We offer a range of wildlife bushing guards. These are essential as transformers provide a place for wildlife to perch.

Reliaguard® Bushing Guards are designed to stay in place.
Retention of the guard once applied is a critical design feature
to…

Reverse Bimetal Lugs

ECL manufacture the full range of reverse bimetal lugs. Reverse bimetal lugs have a aluminium palm and a copper barrel, and are generally used when a bolted connection is required between a copper cable and an aluminium busbar or terminal.

Manufactured…

Nylon Coated Stainless

 

Key Features:

Coated with non-toxic, halogen free Polyester coating
Prevents the corrosion between dissimilar materials
Technical Information

Material: Stainless Steel Type 316
Working Temp: -80C to 150C
Flammability: Fireproof
UV-resistant
Halogen free
Non-toxic
Please contact us if the size you are after isn't displayed in the chart below!

Earth Bars

At ECL we supply a large range of earth bars. Please contact us so we can meet your specific requirements

Distribution Line Post Insulators

We stock a wide range of Maclean distribution insulators.  Included in this is the best-in-class Gen 2 series featuring the universal trunnion clamp, allowing for simple installation in any application.

Manufacturing applied best in class production methodology used in transmission insulator…

Solid Forged Copper Lugs - Long Barrel Long Palm

 

ECLF copper lugs are forged from solid copper rod. These are the preferred choice for low and medium voltage high current situations because of their mechanical strength and waterblock construction.

Long Palm Lugs are supplied blank as standard and can be…

Insulated Ferrules - Loose

Cable Ties Gun

Ratcheting action handles enables auto tightening of stainless steel cable ties.
Separate spring loaded lever for easy cable tie cutting.
Lightweight and compact design

Metric Thread Brass Locknuts

Manufactured from nickel plated brass, these locknuts are suited to the CW, A2, and IP68 cable glands

Heatshrink End Caps

Cross linked polyolefin
UV and weather resistant
Excellent sealing properties adhesive lined
Operating temp -55°C-110°C
RoHS Compliant
Standard colour black
Pressure Relief End Caps have an inbuilt relief/degassing valve that
vents gas buildup above 3-5PSI

EMC (VSD) Cable Glands

Electrical Connections G4 EMC cable glands for variable speed drives offer significant advantages over other EMC cable glands. The patented 360 degree contact system inside the gland allows all degrees of freedom necessary to install a cable easily: the cable…

Stainless Steel 316 Locknuts

Manufactured from high grade stainless steel 316. These are designed to fit our metric thread stainless steel glands

Stainless Steel 304 Locknuts

Metric thread locknuts manufactured from high grade stainless steel 304

Copper Earth Bonding Leads

Roll/Coil Springs

For us in low and medium voltage cable joints, and also as a copper braid earth clamp

Nicopress Crimp Tool 6-16mm

Ratchet Web Strap Pullers

Ratchet Wrench Socket

Temporary Earth Clamp

CW Armoured Glands

Electrical Connections CW range of glands are designed for
use with steel wire armoured cable. Manufactured from nickel
plated brass they are suitable for both indoor and outdoor
applications. Select the appropriate gland using from the gland
sizing information below.…

Cable Pulling Sock

Bimetal Plate

ECL stocks a range of bimetal plate sizes, for bolting copper conductor to aluminium busbar.

We can also supply custom sizes to meet your requirements.

Flameproof Cable Glands - FGO Series

Electrical Connections FGO series cable gland are a high end flameproof cable gland designed for the most
arduous situations.

Technical Specs:
Gas Group - ZONE1/ZONE2 
Dust Group - ZONE21/ZONE 22
For - Gas & Dust potentially explosive atmospheres
Degree of Protection - IP66 – IP68…

*NEW* Self-adjusting Ferrule Crimp Tool 0.08-10mm

Flameproof Barrier Glands

ECL flameproof barrier glands for armoured and unarmoured cable

Type of Cable Gland: DNCEX / PX2K-X
Cable Type: Wire Braid Armoured, Steel Tape Armoured or Screened Flexible Wire Braid.
Sealing Area: Inner Compound Barrier & Cable Outer Sheath.
Indoor and Outdoor use / Dual…

Earth Rod Clamp - SS U Bolt

Bimetal Links

ECL offer the full range of fusion welded bimetal links. Our bimetal links provide a quality termination point for the transition between aluminium and copper cables. Manufactured from high conductivity aluminium and copper the aluminium barrels are supplied with jointing…

Bimetal Stalk Lugs

Our comprehensive range of bimetal stalk lugs are designed for use with switchgear devices requiring connection via a copper stalk or pin.

Manufactured to order, our bimetal stalk lugs fit standard sized aluminium cables and require standard hex dies for crimping.

Stalk…

Bimetal Long Palm Lugs

Long palm bimetal lugs are manufactured from friction welded high purity aluminium and copper rod and are used for double bolt applications.

The barrels are prefilled with joint compound and secured with an end cap. All palms lugs can hole punched…

Bimetal Lugs

ECL has the full range of bimetal lugs for both standard metric conductors and named conductors. Used for over 30 years in NZ, our BL lugs are synonymous with durability and reliability.

PLEASE CHECK: If you are using Fine Stranded Flexible Aluminium…

Aluminium Links - Transition Type (Non Tension)

ECL ALKR links are made from high purity aluminium rod. These links are used for the joining of dissimilar sized aluminium and copper conductors and feature a centre barrier.

Commonly used on URD-sector and single XLPE cables for service main and…

Aluminium Links - Barrier Type (Non Tension)

Manufactured from electrical grade aluminium rod, ALKB links are designed for jointing same size aluminium conductors.

ALKB links feature a centre barrier and are available for most sizes of aluminium conductors including named conductors.

Compression die information is supplied with each link.…

Aluminium Lugs

ECL aluminium lugs are manufactured from solid rod using high conductivity aluminium.

A these lugs are forged from solid material, they are suitable for outdoor use as the palm ends are sealed.

Crimping is carried out with standard hex dies and normal…

Aluminium Parallel Groove Clamps

For tap-off connection of AL-alloy conductors.

Material:

Body: High strength corrosion resistant AL-Alloy.

Bolts: Steel 8.8, hot-dip galvanized.

Bimetallic Parallel Groove Clamps

For connection of AL conductors, ACSR conductors with copper tap-off conductors.

Material: High strength corrosion resistant AL-alloy with hot forged bimetallic sheet, for copper tap-off.

Bolts: Steel, 8.8, hot-dip galvanized.

Nuts: Steel, 8, hot-dip galvanized.

Bimetallic Cover Type Tap Connectors

For AL, ACSR conductors and copper tap-off conductors.

Cover Part: High strength corrosion resistant aluminium alloy.

Middle Part: AL-alloy with hot-forged bimetallic sheet.

Lower Part: High strength copper alloy

Bolt: Steel, 8.8 hot-dip galvanised.

Conical Washers: Steel, corrosion-protected.

Universal Overhead Line Clamp

For clamping of dead ends. Tap off conductors, auxiliary conductors Al and ACSR

Materials:

Body: High strength aluminium alloy, drop forged.

Bolts: Class 8.8 hot dip galvanized

Copper Parallel Groove Clamp

For tap off conection at copper conductors.

Materials:
Body: High strength copper alloy.
Bolts: Stainless steel

Split Bolt Connectors - Line Taps

Manufactured from brass, with a tin plated finish, ECL range of split bolt connectors feature a captive saddle for best clamping performance.

Ideal for jointing or tapping off of conductors, these are supplied as standard with a hex head for ease…

Aluminium Long Palm Lugs

Aluminium Long Palm Lugs are forged from electrical grade solid aluminium rod. The lengthened palm allows for a two bolt connection. It is recommended that belville washers are used when bolting aluminium lugs.

Aluminium long palm lugs are supplied complete with…

Shearhead Holding Tool

Holder for shear off screw terminals and connectors during mounting and tightening screws.

Length: 265mm
Weight: 650g

Shearhead Connector Links 36kV

ECL shearbolt connectors by ERKO are an effective way of connecting two conductors.

Manufactured and certified in Europe, these have been used and proven in the New Zealand market for over 15 years.

 

Shearhead Connector Links 1kV

Shear off screw terminals and connectors are an alternative for crimping technology. These work using shear off head screws enabling
universal and rapid installation.

Shearhead Connector Lugs 36kV

Shear off screw lugs are an alternative to traditional crimping methods. These work using shear off head screws enabling
universal and rapid installation.

Manufactured and certified in Europe, our shearbolts have been used and proven in the New Zealand market for over…

Shearhead Connector Lugs 6kV

Shear off screw lugs are an alternative to traditional crimping methods. These work using shear off head screws enabling
universal and rapid installation.

Manufactured and certified in Europe, our shearbolts have been used and proven in the New Zealand market for over…

Metric BG Type

ECL nickel plated brass glands are rated to IP68 and are designed to protect your electrical installation against the ingress of dust and moisture.

Offering a superior cable grip and enhanced strain relief, the BG series speeds up installation and reduces…

P.G Series

ECL nickel plated brass glands are rated to IP68 and are designed to protect your electrical installation against the ingress of dust and moisture.

PG threaded glands have straight threads designed with a smaller thread depth and larger flank angle. The…

Metal Glands Unarmoured - A2 Type

Designed for general purpose use with XLPE and PVC cables, ECL A2 glands offer very effective cable retention.

Manufactured in nickel plated brass they are suitable for arduous environments where corrosion protection is required.

The large cable range covered by each gland…

Threaded Reducers

Nickel plated brass reducers are threaded bushings used to reduce a thread size. Reducers have a male thread on the outside and a female thread on the inside. 

Threaded Adapters

Coated Compression Gland – Armoured Ex e

Coated Compression Gland – Non Armoured Ex e-d

Earth Tags

Earth tags are nickel plated brass and are used for earthing metal glands. 

EMC Glands 316 Stainless Steel

These VSD/EMC glands are manufactured from high grade 316 stainless steel

For high pollution, gaseous or hygienic applications
Suitable for high pressure steam cleaning
Smooth finish prevents harmful micro organisms to stick to the surface
No threads are exposed
Long-lasting contact using a high definition…

EMC (VSD) Locknuts

These locknuts have ‘machined’ barbs to allow an earthing track to be cut in the metallic enclosure during installation of the EMC gland.

Metric Series

P.G Series

Threaded Stop Plugs

Threaded stop plugs are designed to close unused cable entries on apparatus such as electric motors, junction boxes, etc. TSP stop plugs are available in nickel plated brass, stainless steel and flameproof options and are suitable for use in arduous…

Heat Shrink Cable Glands

GHSC series of heat shrinkable cable glands were developed to provide a cost effective method of providing a weatherproof seal on a variety of cables. The glands are manufactured in accordance with MIL specifications and provide a flame retardant adhesive…

Flameproof Cable Glands - FGE SWA Series

Electrical Connections FGE SWA series armoured cable glands are designed for use in Zone 1 and Zone 2 areas. Manufactured from nickle plated brass they are designed for industrial applications. Glands are supplied complete with locknut. See below for gland…

304 Stainless Steel Glands

Designed for use the food, chemical or marine environments.  Manufactured from 304 stainless steel, these glands have an environmental rating to IP68.

Locknuts are sold separate.

316 Stainless Steel Glands

Designed for use the food, chemical or marine environments.  Manufactured from high grade 316 stainless steel, these glands have an environmental rating to IP68.

Locknuts are sold separate.

EMC Hygiene Glands

Insulated Ferrule Slide Boxes

ECL has two slide boxes for assorted ferrule sizes. Handy, convenient and smart, this box offers a range of sizes for day to day use.

ESSB1 – Assorted sizes 0.5 - 2.5mm²

0.5mm x 50pcs
0.75mm x 100pcs
1.0mm x 100pcs
1.5mm x 100pcs
2.5mm x…

Fork Terminals – Uninsulated

Fork Terminals

Quick Connect - Female

Fully Insulated, Quick Connect - Female

Male Tab

Pin Connector

Piggy Back, Quick Connect

Lip Blade Terminal

In-Line Splice

Lipless Terminal

Wire Nut

End Connector

Ring Terminals

Bullet Connector – Male

Ring Terminals – Uninsulated

Bullet Connector – Female

Copper Pin Connector – Uninsulated

Heat Shrinkable Splice Connectors

Twin End Sleeves - Insulated, Loose

Designed to take two cables at once in the same terminal. Ideal for “neutral” loop between devices.

End Sleeves - Uninsulated, Loose

Designed as a termination for fine stranded cable these tin plated copper sleeves provide encapsulation for the stranding and a secure clamping point for modern device terminals.

Special lengths available on request

End Sleeves Insulated - Strip Form

Ideal for panel/switchboard builders regularly using ferrules.

Special colours to French (T) and German (W) standards available on request.

End Sleeves Insulated - Roll Form

For high use applications such as OEMs and large panel builders.

Designed to be used with GLW stripping and crimping machines.

Dispenser size 150 x 150 x 18mm

End Sleeve Stripping and Crimping

We supply a range of stripping and crimping machines for ferrules. Please contact us if you are interested

Appliance Wire Cross Cutting

We supply a range of cutting machines. Please contact us if you are interested!

End Sleeve Crimping for Loose Ferrules

We supply a range of ferrule crimping machines. Please contact us if you are interested!

DCLSE/DCLSEG Cable Clamps

For mounting of single and multi-conductor composite cables 15–170mm cable diameter.

IEC 61914 Certification
Resistant to oils, UV, ozone, salt, moisture, acids and even nuclear radiation
UL94 self extinguishing, Halogen-free
Temperature range from -40°C to 120°C. (225°C) momentarily
Non magnetic / non conductive
Non oxidizing /…

DCLTR Cable Clamps

• For the mounting of single and multi-conductor low and high voltage cables in a triangular configuration.

• Wide clamping range providing controlled pressure on the cables.

• Stackable and therefore offers a space saving.

• Temperature Range without reduction in strength -40°-…

DCLFX Cable Clamps

• For the clamping and support of four or more cables.

• Stackable and capable of being added end to end.

• Secure clamping allows protection for high fault currents

• Temperature Range without reduction in strength -40°- 120°C

• High mechanical strength of…

Thin Wall Heatshrink

Electrical Connections thin wall tubing is a high quality, heatshrinkable product for a variety of uses and general purpose. Made from flame retardant material, it has excellent physical, chemical and electrical properties.

Technical Data:

Rated Voltage: 600V
Dielectric Strength: 15kV/mm
Tensile Strength: 10.4Mpa
Shrink Ratio…

Heatshrink - Thin Wall Tubing Heatshrink - Reel Form

Electrical Connections TWHS range of heatshrink is available on reel form. With high use applications in mind the reels offer the following advantages:

space saving
maximise product use, no short length
flexibility of length
keeps the product clean.
Please add colour code to Part No.

Click…

Heatshrink - Dual Wall Adhesive Lined

DWHS is a cross linked polyolefin tubing with an adhesive lining. It is typically used in electrical, automotive and marine applications for wiring harnesses, insulation repair, cable splices and mechanical applications such as fuel pipe protection.

3:1 Shrink Ratio;
Flame retardant outer…

Heatshrink - Heavy Wall Adhesive Lined

Our HWT Heavy wall heatshrink tubing provides maximum reliability for insulation of cable joints. Manufactured with adhesive lining, HWT has outstanding sealing and shrinking properties, and excellent mechanical performance. Applications include underground joints, low voltage terminations, gland and lug sealing.

Colour:…

Heatshrink Breakout Boots

• cross linked polyolefin;
• UV and weather resistant;
• available for 2-5 cores;
• excellent sealing properties;
• adhesive lined;
• operating temp -55°C-110°C;
• RoHS Compliant;
• standard colour black

Pressure Relief/Degassing End Caps

Cross linked polyolefin
UV and weather resistant
Excellent sealing properties adhesive lined
Operating temp -55°C-110°C
RoHS Compliant
Standard colour black
Pressure Relief End Caps have an inbuilt relief/degassing valve that
vents gas buildup above 3-5PSI

Light Duty

Standard Duty

Heavy Duty

Extra Heavy Duty

Nylon Cable Tie Mounts

Nylon cable tie mount with an adhesive back to fix to various surfaces

• Material – Nylon 66
• Temperature Range - 40°C to + 80°C
• Flammability – UL 94V-2

Braided Sleeving

Manufactured from woven polyester ECBS braided sleeving is designed for wiring loom use within switchboards and control panels. The sleeving is expandable, provides a tidy finish and offers time savings over conventional cable tied looms.

Coil Spring - Contant Force Spring

For use in low and medium voltage cable joints, and also as a copper braid earth clamp.

Hand Crimp Tool - For bootlace ferrules 50-95mm²

Designed with the professional in mind, this crimp tool features ergonomic handles and a positive ratchet operation to ensure the perfect crimp.

Self-adjusting Ferrule Crimp Tool 0.5-6mm²

The HCDL-6 features a unique self adjusting crimp action. Ranging from 0.5-6mm² ferrlues, simply insert the wire and ferrule and the tool will self adjust and crimp. An enhanced grip is created by the serrated effect of the crimp.

Ratchet Crimp Tool - For bootlace ferrules 0.5-6mm²

Designed for both insulated and uninsulated ferrules. This crimper does a large range of ferrule sizes from 0.5mm² up to 6.0mm²

Ratchet Crimp Tool - For twin insulated ferrules 0.5-6.0mm²

Designed for both insulated twin ferrules. This crimper does a large range of ferrule sizes from 0.5mm² up to 6.0mm²

Hand Crimp Tool - For bootlace ferrules 120-150mm²

This crimper handles the larger sizes of insulated and uninsulated ferrules. With an adjustable crimp setting the crimp jaws provide a serrated finish to the ferrule for the best connection.

Self-adjusting Ferrule Crimp Tool 0.75-10mm²

Featuring a unique self adjusting crimp action, the HCDL-10 crimps ferrules ranging from 0.75-10mm². A easy operation, simply insert the wire and ferrule and the tool will self adjust and crimp.

Hydraulic Crimping Head - 30 Ton

For distribution and transmission applications the HC630A with it's 30 Ton crimping force will handle up to 800mm² aluminium and 630mm² copper. The crimper features a flip top opening to allow insertion of the conductor and ease of die replacement.

Key…

Ratchet Crimp Tool - For bootlace ferrules 6-16mm²

The mid range ferrule crimper, designed for ferrule sizes 6-16mm². featuring adjustable crimp settings for the perfect crimp.

Ratchet Ferrule Crimp Tool - 10-35mm²

This crimper handles the larger sizes of insulated and uninsulated ferrules. With an adjustable crimp setting the crimp jaws provide a serrated finish to the ferrule for the best connection.

Rachet Crimp Tool - For pre-insulated terminals and connectors

Designed with the professional in mind, this crimp tool features ergonomic handles and a positive ratchet operation to ensure the perfect crimp.
Red 0.5-1.5mm²     Blue 1.0-2.6mm²     Yellow 2.6-6.0mm²

Hand Crimp Tool - Indent 1.5-16mm²

A ratchet type indent crimper for standard copper lugs from 1.5-16mm².

Quadro Ferrule Strip & Crimp Tool

Combining four functions, the Quadro ferrule crimper cuts, strips, twists and crimps insulated end sleeves. Supplied complete with quick change connector magazines, this unit is designed with termination speed in mind.

Hex Hand Crimp Tool - 6-50mm²

One of the most popular hand crimpers on the market. With it's small, lightweight design and featuring a rotating self-contained hex die set, this is an ideal asset for any electrician.

Key Features:

Compact lightweight design at just over 1kg!
Crimping range of…

Hex Hand Crimp Tool - 10-120mm²

Featuring a rotating self-contained rotating hexagonal die set, making this a very versatile crimper doing a large range of copper cable sizes from 10mm² up to 120mm²

Key Features:

Self-contained rotating crimp dies
Crimps from 10mm² up to 120mm² copper

Hex Hand Crimp Tool - 6-120mm²

Designed with portability in mind, this crimper features a rotating self-contained hexagonal die set. You can also dismantle the crimper to fit in the carry case making this a very portable and versatile crimper. 

Key Features:

Complete with removable handles and a…

Hand Hydraulic Crimp Tools - 12 Ton

Featuring a two stage pumping action the HC12T42 will accomodate compression of copper and aluminium connectors up to 300mm². The crimp head accepts standard 12 tonne hexagonal dies. Tool is supplied in its own carry case.

Hydraulic Crimp Heads - 12 Ton

Specifically designed for getting into confined and tight spaces. This crimp head caters a large range of dies from 16mm up to 400m Cu. All our hydraulic pumps will power this head.

Key Features:

Lightweight and small design assisting with maneuverability in…

Hydraulic Crimp Head - 18 Ton

One of the most versatile crimp heads on the market with it's ability to use 18 Ton and 12 Ton crimp dies. A die adaptor comes complete with this head to give you the flexibility to do from 16mm up…

Hydraulic Crimp Head - 60 Ton

Designed to crimp larger fittings. Although this unit allows you to change out different dies of choice to cater to a range of crimp sizes. For ease of cable access it has a twist release head. This crimp head is…

Hydraulic Crimp Head - 100 Ton

Designed for the larger transmission connectors in mind this crimp head will accommodate connectors up to 75mm diameter. Tool comes complete with its own carry handle, and a quick release head for easy cable entry. Requires double acting pump for…

Dubuis Battery Powered 12 Ton Crimp Tool

The Dubuis Battery Crimp Tool is a cutting-edge, portable tool designed for efficient and precise crimping applications. The tool boasts a durable construction and ergonomic design, ensuring comfortable use over extended periods.

Key Features:

Comes with 2 x 18V LI 5.0amp batteries,…

Copper Dies - 12 Ton

Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face which stamps onto the connector allowing for…

Aluminium Dies - 12 Ton

Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face which stamps onto the connector allowing for…

Aluminium Dies – CDA Type - 12 Ton

These dies are designed for overhead named conductors. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face…

Aluminium Dies - 18 Ton

Designed for our 18 Ton crimp head HCTP-630H. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face…

Copper Dies - 18 Ton

Designed for our 18 Ton crimp head HCTP-630H. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face…

Compact Cable Cutter - Up to 95mm²

This is a compact cable cutter with a parrot beak cutting action for copper and aluminium cables up to 95mm².

Key Features:

Compact light weight design
Rubber handles for comfort
Note: Not to be used on ACSR or Wire Rope

Compact Cable Cutter - Up to 70mm²

With heavy duty forged steel handles, this cutter is compact enough for the tool box but still able to cut a range of smaller copper and aluminium cables.

Key Features:

Compact design
Sharp heavy duty forged steel jaws
Note: Not to be used on…

Hydraulic Cutter for ACSR, Wire Rope and Steel Rod

A powerful two stage hydraulic cable cutter designed for aerial ACSR conductors and guy stay wire rope. This cutter can also cut a range of aluminium and copper cable sizes and steel rod.

Key Features:

• Fibreglass handle to assist with weight…

Compact Cable Cutter - Up to 25mm²

This small hand cable cutter is a compact and portable tool designed for cutting cables up to 25mm². Its small size and lightweight construction make it easy for you to carry and use in tight spaces or on-the-go.

Key Features:

Small design enabling…

Anti-Voltage Cable Cutters - fiber glass handle

Designed specifically for cutting cables in potentially hazardous electrical environments, it has an anti-voltage rating of 1000V. It is a versatile and reliable tool for cutting various types of cables with ease. With strong and lightweight FRP(fiber-reinforced plastic) handles, they…

Ratchet Cable Cutter - Up to 400mm²

Designed to be small enough to fit in your toolbox but still having the ability to cut larger sized cables. Can cut a range XLPE and sector URD cables. If you are short of space and like to carry your…

Ratchet Cable Cutter - Up to 1000mm²

Designed for use with large single core XLPE and multicore URD cables. This cutter will handle up to 1000mm2 single core and 300mm2 sector URD cables. Tackle your cable cutting challenges with confidence!

Key Features,

Large cable cutting range
Lightweight design at only…

Hydraulic Cable Cutter Head

Designed for precise cutting of large aluminium, copper and sector URD cables. With its robust construction and heavy duty design, this cutting head can handle a wide range of cable diameters, making it an ideal solution for out on site.…

Hand Hydraulic Cable Cutter

A robust cable cutter with swivel head, capable of cutting a large range of aluminium, copper and sector URD cables. Ideal if you're out on site without an easily accessible power source.

Key Features:

Fiberglass handle to assist with weight reduction
5 Ton…

Battery Powered Hydraulic Cable Cutter

Powerful high performance battery powered cable cutter designed for standard copper and aluminium cables. This light weight and compact design enables you to easily transport this cutter around the job site.

Key Features:

Complete with carry case, 2 x 18V Li-Ion batteries,…

HP45 2-Stage High Flow Hydraulic Pump

Compact 2-stage high flow pump providing portability and flexibility for many varied hydraulic tooling applications. Manufactured with an easy carry handle, the pump comes complete with a remote control pendant.

HP45: Hydraulic Pump Single Acting
HP45DA: Hydraulic Pump Double Acting

Key Features:

Suitable…

HP700 Hydraulic Hand Pump

Two stage hand pump capable of delivering 700bar for hydraulic crimp and cutter heads. Ideal for sites that don't have a power supply. Includes 2m of hose.

Key Features:

Hand operated yet still enough pressure to power our cuter and crimp heads

HPFS700 Hydraulic Foot Pump

Two stage foot pump capable of delivering 700bar for hydraulic crimp and cutter heads. Comes complete with 2m hose and coupler. 

Key Features:

No motor for the pump means it is lightweight and portable
Foot operated making it ideal when there is no…

HP35RH Compact Light Weight Hydraulic Pump

One of the smallest and lightest hydraulic pumps on the market, the HP35RH is designed for mobile use and features shoulder straps for ease of carrying.  The HP35RH delivers the full 700bar pressure and has enough oil capacity to power…

HPSEP-12 Compact Hydraulic Pump

This hydraulic pump is compact making it easy to be transported and maneuvered. It comes complete with a 2m hydraulic hose, coupler, hand remote and is compatible with a large range of tools!

 Key Features:

Compact design to make it easier to…

Hole Punching and Cutting

We supply a range of switchboard builder products. Please contact us with your request

Busbar Benders and Cutters

We supply a large range of busbar benders and cutters. Please contact us if you are interested!

Work Tables

Aluminium Dies - 30 Ton

Designed for our 30 Ton crimp head HC630A. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face…

Copper Dies - 30 Ton

Designed for our 30 Ton crimp head HC630A. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die face…

Aluminium Dies - 25 Ton

Designed for our 25 Ton crimp head HCT25. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Copper Dies - 25 Ton

Designed for our 25 Ton crimp head HCT25. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Aluminium Dies - 60 Ton

Designed for our 60 Ton crimp head HC60HT. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Copper Dies - 60 Ton

Designed for our 60 Ton crimp head HC60HT. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Aluminium Dies - 100 Ton

Designed for our 100 Ton crimp head HC100HT. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Copper Dies - 100 Ton

Designed for our 100 Ton crimp head HC100HT. Crafted from high-quality hardened steel, which imparts exceptional strength, durability, and wear resistance. Each die is marked with it's applicable cable sizing or A/F(Across Flat)* measurement. This is engraved on the die…

Earth Rod Driving Tips

Driving earth rods in hard ground is made easier with a driving tip. 

Available for 12.8mm earth rods.

Complete Earth - Streetlighting

12.8mm copper bonded steel rod with a welded earth provides a welded connection from the streetlight to the earth.

Earth Rods - Copper Clad

Copper bonded earth rods establish a quality earth and provide ground contact in all soil conditions.

99.9% pure electrolytic copper bonded to a low carbon steel core
Electrolytic copper bonded (coating thickness: Min254microns)
Provide a low resistance link to the ground 
Supplied in bundles…

Earth Rods - Galv

Galvanised steel earth rods establish a cost effective earth and provide ground contact in all soil conditions.

Designed for structural earthing and lightning protection
Supplied in bundles of 10

 

Threaded Reducers - IECEx Rated

Nickel plated brass reducers are threaded bushings used to reduce a thread size. Reducers have a male thread on the outside and a female thread on the inside. 

Used to adapt or reduce a gland thread to an Ex rated enclosure threaded…

Single Clamps

Designed for the harshest environments, manufactured from 316 grade stainless steel. They are available in multiple sizes ranges. The clamp can be supplied with a Low Smoke Halogen Free cable pad to both position the cable and provide padding.

ECL Stainless…

Clevis Tongues

Suspension Clamps

MPS Suspension Clamps are designed for use with AAC, AAAC and ACSR in suspension applications for deviation angles of up to 20o. 

We offer a wide variety of suspension clamps for your power and utility needs including; angled, corona free, formula…

Twisted Clevis Tongues

Socket Tongues

Shackles

Bimetal Lugs - Flexible Aluminium

ECL offer the full range of fusion welded flexible aluminium bimetal lugs from 25mm2 to 630mm2.

We can supply the full range of bimetal lugs for both standard metric conductors and named conductors. Used for over 30 years in NZ, our…

316 Stainless Steel Glands - A2 Type

Manufactured from 316 stainless steel, they are suitable for arduous environments where corrosion protection is required.

The large cable range covered by each gland size reduces inventory and simplifies gland selection.

Bimetal Lugs - Narrow Palm

ECL has the full range of narrow palm bimetal lugs used for MCCB connections. With over 30 years in NZ, our BL lugs are synonymous with durability and reliability.

PLEASE CHECK: If you are using Fine Stranded Flexible Aluminium Cable, please go to…

Shearhead Connector Lugs 36kV - Double Bolt Type

Shear off screw lugs are an alternative to traditional crimping methods. These work using shear off head screws enabling
universal and rapid installation.

Please contact us if you are needing double bolt shearheard lugs

Bimetal Stalk Lugs - Flexible Aluminium

Our comprehensive range of bimetal stalk lugs are designed for use with switchgear devices requiring connection via a copper stalk or pin. Specifically for fine stranded flexible aluminium cables

These are manufactured to order, so please specify the dimensions of the…

Thick Insulation Ferrules

EMC (VSD) Cable Glands - Ex Rated

Electrical Connections G4 EMC Ex rated cable glands for variable speed drives offer significant advantages over other EMC cable glands.  The patented 360 degree contact system inside the gland allows all degrees of freedom necessary to install a cable easily:…

Threaded Stop Plugs - IECEx Rated

Threaded stop plugs are designed to close unused cable entries on apparatus such as electric motors, junction boxes, etc. TSP stop plugs are available in nickel plated brass, stainless steel and flameproof options and are suitable for use in arduous…

Threaded Adapters - IECEx Rated

Nickel plated brass reducers are threaded bushings used to reduce a thread size. Reducers have a male thread on the outside and a female thread on the inside. 

Used to adapt or reduce a gland thread to an Ex rated enclosure threaded…

Stainless Steel 316 Threaded Reducers

Stainless steel reducers used to reduce a thread size. Reducers have a male thread on the outside and a female thread on the inside.

Manufactured from high quality 316 stainless steel

 

Stainless Steel 316 Threaded Stop Plugs - IECEx Rated

Stainless steel threaded stop plugs are designed to close unused cable entries on apparatus such as electric motors, junction boxes, etc. Our stainless steel TSP stop plugs are suitable for use in arduous industrial applications.

Manufactured from high grade 316 stainless…

1 Ton Wire Grips

0.5 Ton Wire Grips

Nicopress Crimp Tool 10-50mm

Cable Pulling Sock c/w Rotating Eye

*NEW* Self-adjusting Ferrule Crimp Tool 0.5-16mm